MoIP: GW Module for CCU-430 camera control unit

Main Feature

 Supports 10 GbE / 25 GbE.
 Simultaneous output of 12G-SDI and MoIP.
 Firmware must be updated when the MoIP I/F module is installed if the CCU-430 hasbeen already delivered. Update procedure is the same as for other CCU modules.

Function

• Encapsulate to ST-2110 IP
  Main video signal, MON video signal and HD trunk video signal received as SDI signal are converted to ST-2110 IP packet in FPGA. The following signals are encapsulated to ST-2110 IP at the same time.
• Main video signal (4K, Down converted HD, and HD Cut Out)
• MON video signal (1 channel) – HD-SDI.
• HD trunk video signal (1 channel) – HD-SDI
• De-encapsulation of ST-2110 IP packet
  RET video signal and QTV video signal are extracted from the received ST-2110 IP packet and converted to SDI. Up to 6 channels (RET x4 QTV x2) are available.
• Timing and Synchronization based upon PTP-ST-2059 Clock Reference
  Generate synchronizing signal from ST-2059 IP packet, and output.
• NMOS API support (available from June 2019)
  CCU-430 can connect and transmit signals to other devices which support NMOS API.