MoIP: GW Module for CCU-430 camera control unit

Contact

MoIP output is available by installing the MoIP interface board to the CCU-430. Two MoIP interface
modules are available:

MoIP_GW (gateway) module (rear module)
Main 12G-SDI output
Standard [VP_OUT] module or [12G_OUT] module must be replaced to [MoIP_GW]
The existing [HD_OUT] module must be replaced by this module.
MoIP_FR (front) module
This module addresses the MoIP_GW module if no HD_VP option module is installed.

Tư vấn

0983747273

Main Feature

 Supports 10 GbE / 25 GbE.
 Simultaneous output of 12G-SDI and MoIP.
 Firmware must be updated when the MoIP I/F module is installed if the CCU-430 hasbeen already delivered. Update procedure is the same as for other CCU modules.

Function

Encapsulate to ST-2110 IP
Main video signal, MON video signal and HD trunk video signal received as SDI signal are converted to ST-2110 IP packet in FPGA. The following signals are encapsulated to ST-2110 IP at the same time.
Main video signal (4K, Down converted HD, and HD Cut Out)
MON video signal (1 channel) – HD-SDI.
HD trunk video signal (1 channel) – HD-SDI
De-encapsulation of ST-2110 IP packet
RET video signal and QTV video signal are extracted from the received ST-2110 IP packet and converted to SDI. Up to 6 channels (RET x4 QTV x2) are available.
Timing and Synchronization based upon PTP-ST-2059 Clock Reference
Generate synchronizing signal from ST-2059 IP packet, and output.
NMOS API support (available from June 2019)
CCU-430 can connect and transmit signals to other devices which support NMOS API.

Ratings
Power	DC+12V4[A] max, DC +3.3V4.8[A] max
Power Consumption	30[W]
Ambient Temperature	Operating：0℃～＋40℃, Storage：－20℃～＋60℃
Relative Humidity	30 % to 90 %(Non-condensing)
25Gigabit Ethernet
Ethernet standard	25GBASE-SR（IEEE802.3by）or 25GBASE-LR（802.3cc）（depends on optical transceiver）
Maximum transmission speed	25Gbps（theoretical value）
10Gigabit Ethernet
Ethernet standard	10GBASE-SR（IEEE802.3ae）or 10GBASE-LR（802.3ae）（depends on optical transceiver）
Maximum transmission speed	10Gbps（theoretical value）
SDI Output
HD output	3G-SDI:SMPTE424/425 Level-A/B, HD-SDI:SMPTE292M 4output BNC, 0.8Vp-p, 75 ohms
4K output	12G-SDI:SMPTE 2082 Frame rate:59.94P, 29.97P, 23.98P, 50P ,25P ,24P, 1ch 4output
Gigabit Ethernet Trunk Line
Ethernet standard	1000BASE-T(IEEE 802.3ab)
Maximum transmission speed	1Gbps（theoretical value）
Connector / Cable	8P8C (RJ45) / UTP Cat.5e